Stanhope-Seta’s New hand-held Conductivity Meter, has been designed to measure the electrical conductivity of distillate fuels such as Jet-A1 to ASTM D2624 or IP 274.

The unit is provided in an industry standard ATEX approved polyamide housing, with a built in Lithium Ion rechargeable battery system. The conductivity sensor is constructed of two 316SS coaxial electrode sensors. It has a measurement range of 0 to 2000 picosiemens/meter (pS/M), although it is optimized and is usually used in the 0 to 500 pS/M range.

It has an easy to use menu system and allows users to store up to 10 sample data points internally along with the temperature date and time, this data can be viewed on the screen or transferred to a computer via USB. Software is also available for data analysis plotting and archiving.

All plants need sunlight to grow and flourish, but the right amount can vary depending on the plant.Traditionally growers have relied on their eyes to determine the correct level, with Spectrum's new Light-Scout DLI 100, growers can accurately monitor the (DLI) over a 24 hour period.

The Light-Scout is quick and easy to use. With the push of a button it runs for up to 24 hours at a time and displays measurements every 10 seconds in light intensity (μmol m-2 or foot-candles) and DLI. The Light-Scout comes in a pack of three and can be positioned throughout your greenhouse, golf course or crops so you can compare the difference in light levels and the effect it is having on plant growth and quality.

The Light-Scout is battery operated and water resistant.

John Morris Scientific are pleased to introduce their latest Theory and Product Guide to Vacuum, Leak Detection, Flow and Pressure Measurement solutions.

The Vacuum Forte features a full range of practical solutions including three new product portfolios:

·   Sensistor – Hydrogen leak detection

·   Excel – Industrial leak detection in co-operation with Adixen

·   Pink – Custom vacuum solutions

Our guide contains innovative technologies including water saving chemistry vacuum systems, residual gas analysis for carbon emmision monistoring and hydrogen tracer gas mix based leak detection.

Spectrum Technologies have released the IPM Scope CAM - an upgraded version of the IPM scope. Previously users had to transfer images and videos to a computer for viewing, now they can view them on a built-in screen before they are transferred.

Fine details of plant disease symptoms, insects or anything else too small to see with the naked eye can be clearly defined with IPM’s versatile 3-25X magnification. Instead of straining to look into a tiny eyepiece, the IPM Scope CAM is placed over the leaf and the magnified image can be viewed on the screen or transferred to a computer via a SD card/USB cable.  Once the image has been transferred to a computer it can be magnified up to 300X.

The IPM Scope CAM combines a digital camera (5.1 mega pixels), precision optics and LED lighting into a powerful handheld microscope.

Cannon’s new portable viscometer, the SimpleVIS has been specifically designed for industrial users in non-laboratory environments. It provides fast and reliable kinematic viscosity measurement and is suitable for a range of oils including mineral, synthetic and formulated motor /gear oil.

The SimpleVIS has a rapid cycle time of 3 minutes and a viscosity range of 40oC: 10 – 700 mm2/S (cSt) and 100oC: 5.5 - 200mm2/S (cSt). Dark/opaque liquids can be measured with the same precision as transparent fluids without the need to change tubes.

With a graphical touch screen and no additional gauges or valves to adjust the SimpleVIS is quick and easy to use. It is fully self-contained and doesn’t need to be connected to an external computer.

Occupying an extremely small footprint of 128mm x 356mm x 304mm the SimpleVis is the smallest campillary viscometer on the market.

John Morris Scientific would like to congratulate Allan Brett for 50 years of service with the company. Over the last 50 years Allan has worked with three generations of the Wyzenbeek family and has seen John Morris Scientific grow from a small consumable supplier to the largest privately owned scientific instrument supplier in Australia, New Zealand and the South West Pacific.

Commencing on 30th November 1959 Allan started work at JMS as an assistant storeman, working his way up to Store Manager and then moved into sales. Since then he has held several positions including Branch Manager for our Melbourne office in 1971 and Territory Manager in the Sydney Metropolitan area.  For the last fifteen years he has also looked after our many customers in the South West Pacific region.

Allan has developed a very loyal customer base, who know that they can trust and rely on him. He continues to be one of JMS’s most successful Territory Managers.

As well as working for John Morris Scientific, Allan is an active member of the community. He has been a member of a Surf Life Saving Club, a volunteer with the NSW Ambulance Service and for the last 35 years in the Rural Fire Service where he has served as a Group Officer, Deputy Captain and Captain.

We thank him for his contribution over the last 50 years and look forward to his continued involvement at JMS.

John Morris Scientific are proud to offer  Cole Parmer’s range of Industrial Freezers.

Basic-Use Freezers are suitable for non-hazardous environments. They are available in under-counter and upright models. A range of sizes are available including under-counter 142L and upright between 388L and 566L.

General-Purpose Laboratory Freezers are easy to clean and are suitable for storing biological and chemical materials. They are available in both under-counter and upright models.  Under-Counter freezers are available with a temperature range of -20oC to -15oC and a capacity of 142L. Upright freezers have a temperature range of -20oC to -12oC and a capacity of 566L

Safety Freezers are suitable for storing flammable materials and protecting samples from external explosive conditions. Flammable Freezers contain a spark-proof interior and a magnetic door with airtight seals. Explosion-Proof Freezers are designed for locations where explosive conditions may exist (external to the unit). They are suitable for use in Class 1 and Groups C and D hazardous locations.  Safety Freezers are available with a temperature range of -20oC to -15oC and a capacity of 142L or 566L.

Cole Parmer is a complete single source supplier for all laboratory instrumentation and consumables as well as water, industrial and environmental monitoring.

John Morris Scientific are proud to offer Cole Parmer’s complete range of Industrial Fridges.

Basic-Use Fridges are an economical alternative to laboratory fridges and are suitable for non-hazardous materials. They are available in a range of sizes including 49L to 170L (under counter) and 326L to 659L (upright).

General Purpose Fridges are easy to clean and resistant to most acids, solvents and chemicals.  They are available with single (hinged solid or thermopane glass) or double (hinged solid or sliding thermopane glass) doors. Single door fridges have a temperature range of 1oC to 8oC and a capacity of 501L or 764L (the 764L is only available with thermopane glass). Double door fridges have a temperature range of 1oC to 8oC and a capacity of 1387L (solid) and 934L to 1285L (thermopane).

Safety Fridges are suitable for storing flammable materials and protecting samples from external explosive conditions. Flamable Fridges are completely insulated and provide protection against electric sparks. Explosive-Proof Fridges are suitable for locations where explosive conditions may exist (external to the unit). Safety Fridges  have a temperature range of 2oC to 10oC and a capacity of 159L to 680L (Flammable) and 159L to 566L (Explosive).

Heavy Duty Storage Fridges contain a locking system to help protect valuable samples. They are available in a range of styles including under-counter, general purpose  and premier. Under-Counter fridges are available with manual or automatic defrost. They have a temperature range of 2oC to 8oC and a capacity of 119L to 144L. General-Purpose Fridges have manual defrost, a temperature range of 2oC – 10oC and a capacity of 680L. Premier Fridges have automatic defrost, a temperature range of 2oC to 10oC and a capacity of 680L – 2265L.

Chromatography Fridges have a  stainless steel interior and are available with up to three doors. They have a temperature range of 1oC to 10oC and a capacity of 680L to  2265L

Cole Parmer is a complete single source supplier for all laboratory instrumentation and consumables as well as water, industrial and environmental monitoring. Delivery time is approximately two weeks from date of ordering.

John Morris Scientific are proud to offer Cole Parmer’s complete range of tubing for Ismatec® Pumps.

Tygon® Laboratory Tubing (translucent) is non-toxic and flexible (can bend to small radius curves). It is suitable for general laboratory use and can withstand temperatures ranging from -60oC to 232oC.

Tygon® LFL Tubing (translucent) is non-toxic and flexible (can bend to small radius curves). It is suitable for pharmaceutical, food and beverage, biotechnology and general laboratory use (can withstand temperatures ranging from -50oC to 74oC).

Peroxide and Platinum-Cured Tubing (translucent) are odourless and non-toxic. They are suitable for pharmaceutical, biotechnology, food and beverage, aerospace and general laboratory applications. The tubing can withstand temperatures ranging from -51oC to 238oC (Peroxide-Cured) and -50oC to 230oC (Platinum-Cured).

PVC Solvent/Hydrocarbon Tubing  (translucent) is suitable for chromatography applications and the transfer of fuels, distillates, lubricants and glycol-based coolants. It is resistant to ozone and UV light and can withstand temperatures ranging from -30oC to 85oC.

Tygon® MHLL Tubing (opaque) is suitable for applications using acetone, methyl-ethyl-ketone (MEK) and other highly aggressive chemicals. It contains an ultra chemical-resistant inner liner and can withstand temperatures ranging from -70oC to 52oC.

Viton® Tubing (opaque black) is suitable for high temperature applications and for transfering acids and solvents. It can withstand temperatures ranging from -32oC to 204oC.

PharMed®  BPT Tubing (opaque) is non-toxic, nonhemolytic and is resistant to acids, alkalies, oxidizing agents and oils (animal and vegetable). It is suitable for cell and tissue culture, pharmaceutical applications and light-sensitive samples (can withstand temperatures ranging from -73oC to 135oC).

Cole Parmer is a complete single source supplier for all laboratory instrumentation and consumables as well as water, industrial and environmental monitoring.

John Morris Scientific are proud to offer Cole Parmer’s range of Ether and Ester Polyurethane tubing.

Ether-Based tubing is available in a range of styles

Tygothane® tubing is plasticizer free and is resistant to oils, grease and fuels. It is suitable for abrasive and viscous slurry transfer, instrumentation, control lines, food and cosmetic processing and coolant recovery systems (can withstand temperatures ranging from -73.3^oC to 82.2^oC).

Cole-Parmer tubing is non toxic and resistant to weak organic acids and oils. It is suitable for food processing, general manufacturing, automotive, computer devices, general laboratory and fuel applications (can withstand temperatures ranging from -40^oC to 85^oC). Colour-Coded tubing is available in green, blue red, black and aqua-tint. It can withstand temperatures ranging from -42^oC to 82^oC.

Ester-Based tubing  is plasticizer free and resistant to petroleum based chemicals. It is suitable for high-purity, general laboratory and petroleum-based transfer (not suitable for aqueous solutions). Ester-Based tubing can withstand temperatures ranging from -56^oC to 85^oC.

Cole Parmer is a complete single source supplier for all laboratory instrumentation and consumables as well as water, industrial and environmental monitoring.