Latest

ATAGO RX-5000i Refractometer with 2 key upgrades

ATAGO rx-5000i_l 2015 upgrade Urea Brix nD

This world famous smart refractometer has just been enhanced with two major upgrades:

  1. Urea Special Scale – added to preprogrammed “Special Scales”
  2. Brix and nD – results now shown constantly under chosen scale results offering data check convenience

ATAGO rx-5000i 2015 touchscreen shots

Featuring an new user interface, the touch screen makes navigation and selection easy.

  • RX-5000i measures with the same accuracy level as the RX-5000α ±0.03% Brix and ±0.00004 nD.
  • Recently added functions are USB flash drive and self-diagnosis capability.
  • Our product comes standard with a 2 year limited warranty against manufacturer defects from date of original purchase.
  • Warranty period may be extended to 3 years.
  • FDA 21 CFR Part 11 Software Included in Standard Delivery.

 

Specifications

Model RX-5000i
Cat.No. 3276
Scale Refractive index
Brix
Measurement Range Refractive index (nD) : 1.32422 to 1.58000
Brix : 0.00 to 100.00%
(5 to 75°C ATC)
Resolution Refractive index (nD) : 0.00001
Brix : 0.01%
Temperature: 0.01°C
Measurement Accuracy Refractive index (nD) : ±0.00004
Brix : ±0.03%
*When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C
Repeatability Refractive index (nD) : ±0.00002
Brix : ±0.01%
*When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C
Temperature control range 5.00 to 75.00°C
(No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature)
Power Supply AC100V to 240V, 50/60Hz
Dimensions & Weight 37×26×14cm, 6.6kg
(Main Unit only)
Power consumption 90VA
Mode MODE-1:
Displays the measurement value once the sample reaches the target temperature.MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
Output terminals • Printer (for ATAGO digital printers)
• Computer -USB
Warranty 2 years standard (3 years with product registration) excluding touchscreen

Photo Gallery Slideshow

Leave a comment

Your email address will not be published.


*